Included with the airbrush are all three available spray heads

Place a new o-ring (98-8017) around the lower seat (Note

which are known to the State of California to cause birth defects or other reproductive harm

Remove fluid shut-off knob by turning counter clockwise

OTHER FEATURES INCLUDE - long lasting

DeVilbiss 702712 1.2 Tip & Needle Set .021 Included with the airbrush areTip Size I. D. (mm) 1. 2 Replacement 1. 2mm fluid tip and needle for TEKNA spray guns. NOTE: When replacing the fluid nozzle or fluid needle, replace both at the same time. Lightly lubricate the threads of the fluid nozzle before reassembling. Torque to 1416 nm (1012 ft lbs). Dont over tighten the fluid nozzle. Use 10 mm wrench supplied with gun.