Animated 3D print preview

0MM) x 320mm (+/-1

You can then just "pop" the model off the blank

- Make sure there is enough space on all sides

nGen is best printed on a heated build platform

PrintaClean - 250ml PrintaFix // Lim Animated 3D print previewPrintaClean 250ml PrintaClean If it's hard to get your glue off the building board, PrintaClean is the solution! PrintaClean can clean your building board. Allow the build plate to cool to room temperature. Then remove the build plate from the 3D printer and spray a generous amount of PrintaClean on it. Let it sit for 20 30 seconds to loosen. Wipe off any residue with a piece of paper. Repeat if necessary. PrintaClean If it's hard to get your glue off